[Xastir] KPC-3 config file

[David Ranch]

Hey Danny,

Once you get something working well, you might consider sending it to 
Tom/Curt/etc so it can be added into Xastir!

--David
KI6ZHD



On 12/10/2015 01:28 AM, Danny wrote:
> Thanks Tom ...
>
> I used your examples and am busy building my own startup file.
>
> Have a nice day
>
> Danny
>
> On Dec 10 15, Tom Russo :
>> To: Xastir - APRS client software discussion <xastir at xastir.org>
>> Date: Thu, 10 Dec 2015 00:22:44 -0700
>> From: Tom Russo <russo at bogodyn.org>
>> Subject: Re: [Xastir] KPC-3 config file
>> User-Agent: Mutt/1.5.24 (2015-08-30)
>> X-BeenThere: xastir at lists.xastir.org
>>
>> On Thu, Dec 10, 2015 at 08:29:44AM +0200, we recorded a bogon-computron collision of the <mynixmail at gmail.com> flavor, containing:
>>> Hi guys,
>>>
>>> Just want to know which startup file I must use for a KPC-3(non-plus) TNC. Also,
>>> is there someone that can provide me with one of their KPC-3 startup files.
>> If you don't get a response from someone that has a KPC-3 (non-plus) in Xastir
>> operation, you can easily adapt the existing tnc-startup.kpc3 file (which is
>> for the 3+) just by removing the 3+-specific commands from it.
>>
>> This should do the trick.  Cut/paste everything between the "#------" lines
>> into a file in the same directory as the other tnc-startup files, and
>> point Xastir at it.  This should be enough to use the old KPC-3 with Xastir.
>> I have no KPC-3 to test on, but I did look on line at a KPC-3 manual just now
>> to find the commands that existed in that model.
>>
>> I did something similar back when I first got into using Xastir with a very
>> old KPC-2.  In fact, you'll find that "tnc-startup.kpc2" bears quite the
>> resemblance to the following.
>>
>> #------
>> int terminal
>> HID off
>> B E 0
>> DIGI on
>> ECho off
>> FILT off
>> FLow off
>> FUll off
>> HEA off
>> LFadd off
>> LFSup ON
>> AUTOLF off
>> MCOM off
>> MON ON
>> MResp OFF
>> MRPt on
>> MSTamp off
>> NEWmode off
>> #PACLen 128
>> PASSALL off
>> #
>> # Important!  Monitor only PID 0xf0 packets:
>> PID off
>> #
>> SCR 0
>> #-----
>>
>> -- 
>> Tom Russo    KM5VY   SAR502   DM64ux          http://www.swcp.com/~russo/
>> Tijeras, NM  QRPL#1592 K2#398  SOC#236        http://kevan.org/brain.cgi?DDTNM
>>   echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] [n-z][a-m]
>>
>>   
>>
>>
>> _______________________________________________
>> Xastir mailing list
>> Xastir at lists.xastir.org
>> http://xastir.org/mailman/listinfo/xastir
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://xastir.org/mailman/listinfo/xastir