[Xastir] KPC-3 config file

[Tom Russo]

On Thu, Dec 10, 2015 at 09:28:50AM -0800, we recorded a bogon-computron collision of the <xastir at trinnet.net> flavor, containing:
> 
> Hey Danny,
> 
> Once you get something working well, you might consider sending it to 
> Tom/Curt/etc so it can be added into Xastir!

Yeah.   That's how tnc-startup.kpc2 got there (look at the CVS log for 
revision 1.1...)

> On 12/10/2015 01:28 AM, Danny wrote:
> > Thanks Tom ...
> >
> > I used your examples and am busy building my own startup file.
> >
> > Have a nice day
> >
> > Danny
> >
> > On Dec 10 15, Tom Russo :
> >> To: Xastir - APRS client software discussion <xastir at xastir.org>
> >> Date: Thu, 10 Dec 2015 00:22:44 -0700
> >> From: Tom Russo <russo at bogodyn.org>
> >> Subject: Re: [Xastir] KPC-3 config file
> >> User-Agent: Mutt/1.5.24 (2015-08-30)
> >> X-BeenThere: xastir at lists.xastir.org
> >>
> >> On Thu, Dec 10, 2015 at 08:29:44AM +0200, we recorded a bogon-computron collision of the <mynixmail at gmail.com> flavor, containing:
> >>> Hi guys,
> >>>
> >>> Just want to know which startup file I must use for a KPC-3(non-plus) TNC. Also,
> >>> is there someone that can provide me with one of their KPC-3 startup files.
> >> If you don't get a response from someone that has a KPC-3 (non-plus) in Xastir
> >> operation, you can easily adapt the existing tnc-startup.kpc3 file (which is
> >> for the 3+) just by removing the 3+-specific commands from it.
> >>
> >> This should do the trick.  Cut/paste everything between the "#------" lines
> >> into a file in the same directory as the other tnc-startup files, and
> >> point Xastir at it.  This should be enough to use the old KPC-3 with Xastir.
> >> I have no KPC-3 to test on, but I did look on line at a KPC-3 manual just now
> >> to find the commands that existed in that model.
> >>
> >> I did something similar back when I first got into using Xastir with a very
> >> old KPC-2.  In fact, you'll find that "tnc-startup.kpc2" bears quite the
> >> resemblance to the following.
> >>
> >> #------
> >> int terminal
> >> HID off
> >> B E 0
> >> DIGI on
> >> ECho off
> >> FILT off
> >> FLow off
> >> FUll off
> >> HEA off
> >> LFadd off
> >> LFSup ON
> >> AUTOLF off
> >> MCOM off
> >> MON ON
> >> MResp OFF
> >> MRPt on
> >> MSTamp off
> >> NEWmode off
> >> #PACLen 128
> >> PASSALL off
> >> #
> >> # Important!  Monitor only PID 0xf0 packets:
> >> PID off
> >> #
> >> SCR 0
> >> #-----
> >>
> >> -- 
> >> Tom Russo    KM5VY   SAR502   DM64ux          http://www.swcp.com/~russo/
> >> Tijeras, NM  QRPL#1592 K2#398  SOC#236        http://kevan.org/brain.cgi?DDTNM
> >>   echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] [n-z][a-m]
> >>
> >>   
> >>
> >>
> >> _______________________________________________
> >> Xastir mailing list
> >> Xastir at lists.xastir.org
> >> http://xastir.org/mailman/listinfo/xastir
> > _______________________________________________
> > Xastir mailing list
> > Xastir at lists.xastir.org
> > http://xastir.org/mailman/listinfo/xastir
> 
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://xastir.org/mailman/listinfo/xastir

-- 
Tom Russo    KM5VY   SAR502   DM64ux          http://www.swcp.com/~russo/
Tijeras, NM  QRPL#1592 K2#398  SOC#236        http://kevan.org/brain.cgi?DDTNM
 echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] [n-z][a-m]