From XastirWiki
(Redirected from Older Tiger/Line maps)
Jump to: navigation, search

Tiger/Line 2008 shapefiles

Recent versions of Xastir have the ability to display Tiger 2008 maps. The latest Git should provide all of the files needed except for the maps themselves.

Here is the message from Curt about the new feature:

    On Fri, 17 Apr 2009, Curt, WE7U wrote:
    Thanks to the below mentioned people we now have Tiger 2008 streetmap capability in Xastir...  And it's really fast!  If you're used to the Online Tigermap server, the speed of this will really blow you away.  It's also great for taking Xastir on the road where you don't have internet access.  Please note the special instructions below for setting up the layering so that roads aren't covered up.  Perhaps we can automate that part soon

Here are instructions for downloading an entire US state of tiger maps at once, extracting the maps, and configuring them for use in Xastir. Note that you don't have to do an entire state at once, that's just what I wanted to do. You can do individual counties.

Download the Tiger 2008 files

Go to with a browser. Use this to find the name of the directory for the state you are interested in.

Make a temporary directory to download your maps, and then use wget to start the download:

    mkdir ~/tiger2008
    cd ~/tiger2008
    wget -r\*

This will recursively grab all of the files for the state you selected. Indiana's files were about 700MB zipped. The download will take some time even on a fast connection!

Extract the files

All of the files you downloaded are located in individual zip archives. You can unzip all of them using this command:

    cd ~/tiger2008
    for i in `find . -name "*.zip"`; do unzip -d `dirname $i` $i;done;

Like the download step, the unzip step will take a while.

When that completes, you can remove the zip files, which are no longer needed:

    find ~/tiger2008 -name *.zip -exec rm '{}' ';'
Move the extracted files to your maps directory
    cd ~/tiger2008/
    sudo mv TIGER2008 /usr/local/share/xastir/maps/

You may want to adjust the directory hiearchy depending on your personal perferences.

Launch Xastir to index the new maps

Xastir should index all of the shapefiles when it loads. Then shut down Xastir before you select any of the maps in the map chooser.

Fix the layering

The map layering needs to be adjusted for best results. You have several options for this.

Before you use any of them, make a backup of your map_index.sys file just in case:

    cp ~/.xastir/config/map_index.sys ~/.xastir/config/map_index.sys.bak
Use a perl script

Lee, K5DAT, posted the following perl script to the Xastir mailing list.

Copy and paste this into a new file called


# backup the map index file

`cp ~/.xastir/config/map_index.sys ~/.xastir/config/map_index.sav`;

# Define variables

my ($indexfile, $checkline, $layer1, $layer2, $layer3);

$indexfile = "map_index.sys";
$layer1 = "00997";
$layer2 = "00996";
$layer3 = "00995";

# Enable PERL simple debug
use strict;
use warnings;

#open the config file
open(INDX, $indexfile) || die("Cannot Open File");

#open a temp output file
open(TMP, ">temp.sys");

# read lines in, fine/replace text, and write to the temp file
  $checkline = $_;
  if (rindex($checkline, "arealm") > 0)
    elsif (rindex($checkline, "pointlm") > 0)
    elsif (rindex($checkline, "tabblock") > 0)
      substr ($checkline,44,5,$layer3);
    print TMP $checkline;

# copy the temporary file to the map index - thus overwriting it with the updated version
`cp ~/.xastir/config/temp.sys ~/.xastir/config/map_index.sys`;

# Delete the temp file
unlink "temp.sys";

Move your new perl file to the Xastir config directory:

    mv ~/.xastir/config/

Run the perl file:

    cd ~/.xastir/config/
Use vi

Use the "vi" editor to change the map layers:

    vi ~/.xastir/config/map_index.sys
Use sed

Jeremy, N0YAX, provided instructions for using sed to do the same thing:

= Method 1 - gnu sed =
    sed -i -e "/tabblock/s/01000/00995/g" \
       -e "/pointlm/s/01000/00996/g" \
       -e "/arealm/s/01000/00997/g" map_index.sys
= Method 2 - other sed binaries =
    cp map_index.sys mapindex.sys.bak
    sed -e "/tabblock/s/01000/00995/g" \
       -e "/pointlm/s/01000/00996/g" \
       -e "/arealm/s/01000/00997/g" map_index.sys.bak > map_index.sys
= Launch Xastir and select your maps

Open the map chooser and you should see a TIGER2008 folder. Select the map(s) you want to view. Enjoy!

= A word of caution =

You probably want to select just a county (or maybe a few) at a time. Selecting an entire state is likely to make loading maps really really slow, even on a fast machine.

TIGER/Line 2006

Tiger/Line 2006 data converted to shapefile format is available from Look in the "pub/TIGER_2006_SE/" directory. These maps only work with dbfawk support.

Unpack the zipfiles in your maps directory. I recommend creating a "TIGER_2006_SE" subdirectory or something similar, and unpacking the zipfile there. When unpacked, each state zipfile will produce a directory with the state's postal abbreviation as its name, and two subdirectories, "Polylines" and "Polygons." These directories each contain shapefiles with different information in them --- Polylines are linear features such as roads and streams, Polygons are area features such as parks and airports. You need both, even though they have the same names (the name of the county they cover).

You can also create your own TIGER/Line shapefiles from the raw data at the Census web site, The process requires two conversions: converting the linear features, and assembling the polygon features. The TIGER/Line data is a topological format, and polygons are not stored in a simple manner; this second step is time consuming.

To convert the polylines: Download the county files you want. Then unzip each one into its own directory (call it "in_directory"). Then cd to in_directory and run the following command:

     ogr2ogr -f "ESRI Shapefile" -t_srs EPSG:4326 foo .

This will create a subdirectory of in_directory called "foo" which will contain a number of shapefiles and auxiliary data. The files called "CompleteChain.*" are the ones you want; they are the polylines corresponding to roads and other linear features. Copy these to your xastir maps directory and rename them to the name of the county they represent. Then install tgr2shp.dbfawk in your share/xastir/config directory and reindex maps. Ta da. See above: tgr2shp.dbfawk is now part of the xastir distribution..."

Note that you'll need dbfawk support compiled into Xastir to make these Tiger/Line maps look nice. For the 2003 TIGER/Line data, Derrick Breshear created scripts to process all of the Tiger/Line raw data into Shapefiles, then they were put on a download site made available by Kevin Glueck, "". The 2006 Second Edition data were processed by Jason Winningham and made available on the site by Gerry Creager. Thanks go to Tom, Derrick, Kevin, Jason and Gerry for making these maps so accessible to the rest of us.

The second step to rolling your own TIGER/Line shapefiles is to assemble the polygons. This requires GDAL/OGR configured with python support, and requires that you have the Python language installed. Use the script included in the "scripts" directory of Xastir's source tree.

As an example, if you have un-zipped the file (the TIGER/Line file for Bernalillo County, NM) into a directory called TGR35001, then TGR35001 Bernalillo_County_NM_Polys.shp

would create a shapefile of TIGER polygons (water bodies, political boundaries, parks, wilderness areas) that you can install in your maps directory and read directly using normal shapefile support.

Viewing these shapefiles as filled polygons requires dbfawk support, and the rules for displaying them are contained in the file tgr2shppoly.dbfawk.

Tiger/Line 2000 map data is available from but requires free registration. A example of these types of files can be found at "". You'll need to run "tar xzvf <filename>" on each one of the files from that last site after downloading. Some layers that may be of interest:

  CMSA/MSA Polygons 2000              tgr*msa00.shp
  PMSA Polygons 2000                  tgr*pms00.shp
  Consolidated Cities                 tgr*city.shp
  County - Current                    tgr*cty.shp
  County 2000                         tgr*cty00.shp
  Designated Places 2000              tgr*plc00.shp
  Designated Places Current           tgr*plccu.shp
  Key Geographic Locations            tgr*kgl.shp
  Landmark Points                     tgr*lpt.shp
  Landmark Polygons                   tgr*lpy.shp
  Line Features - Hydrography         tgr*lkH.shp
  Line Features - Landmarks           tgr*lkD.shp
  Line Features - Misc. Transport     tgr*lkC.shp
  Line Features - Non-visible         tgr*lkF.shp
  Line Features - Physical            tgr*lkE.shp
  Line Features - Rails               tgr*lkB.shp
  Line Features - Roads               tgr*lkA.shp
  Line Features - Unknown             tgr*lkX.shp
  School Districts - Elementary       tgr*elm.shp
  School Districts - Middle           tgr*mid.shp
  School Districts - Secondary        tgr*sec.shp
  School Districts - Unified          tgr*uni.shp
  Traffic Analysis Zones              tgr*taz.shp
  Urban Areas                         tgr*urb.shp
  Water Polygons                      tgr*wat.shp
  Alternate Feature Names             tgr*alt.shp
  Address Matching Info               tgr*add2.shp
  ZIP+4 Left and Right Info           tgr*zip.shp
  Key Geographic Location Addresses   tgr*add.shp
  Landmark Polygon Names              tgr*lpy2.shp
  Landmark Polygons Multi-Landmark    tgr*lpy3.shp
  Water Polygons Multi-Names          tgr*wat2.shp

Tiger/Line 1997

Older Tiger97 maps converted to shapefile download-able from: